|
CS-20 type high-frequence resonance capacitors
|
These products are the first selection for the use of high-power and solid-state high-fraquence resonant cireuit.They have the lower equivalent inductance and resistivity,and their working-frequence extent is very wide(10KHZ-450KHZ),and they can bear a large quantity of electric current (generally over several ten amperes).They are particularty suitable for the use of low-votalge great-current solid-state resonant circuit.
Their outermost are the first selection for the use of high-power and solid-state high-frequence resonant circuit.They have the lower equivalent inductance and resistivity,and their working-frequence extent is very wide(10KHZ-450KHZ),and they can bear a large quantity of electric current (generally over several ten amperes).They are particularty suitable for the use of low-uotalge graet-current solid-state resonant circuit.
Their outermost electrodes are made of copper plate.According to the cooling ways,they could be made two kinds of condensers,i.e.,indirect and direct water-cooled type.In the small-power solid-state high-frequence source equipments,they could be assembled with the fin force air-cooled structure.
The main electrical parameters are the following:
|
|
capacitance ( μF ) |
The most voltage (vac)
|
The most bearing circuit (A)
|
The limit working freguence (KHZ)
|
The Cool-Type
|
Size(mm)
(LxWxH)
|
0.22 |
100 |
30 |
500 |
Indirect water-cooling |
65×45×12 |
0.25 |
500 |
100 |
500 |
Indirect water-cooling |
94×75×75 |
0.25 |
400 |
300 |
500 |
Direct water-cooling |
110×70×35 |
0.30 |
400 |
350 |
500 |
Direct water-cooling |
110×70×35 |
0.33 |
400 |
200 |
500 |
Indirect water-cooling |
80×80×36 |
0.50 |
400 |
500 |
500 |
Direct water-cooling |
130×70×35 |
0.65 |
400 |
400 |
500 |
Indirect water-cooling |
80×80×36 |
0.65 |
650 |
600 |
500 |
Indirect water-cooling |
80×80×36 |
0.75 |
400 |
400 |
500 |
Indirect water-cooling |
80×80×36 |
1.00 |
400 |
500 |
500 |
Indirect water-cooling |
80×80×36 |
1.00 |
600 |
600 |
500 |
Indirect water-cooling |
80×80×36 |
Note :1.the most bearing circuit means the limit under the better water-cooled condition.
2 In addition,we could produce the requested condensers according to the discussed agreements. |
|
|
CS21-type high-frequence coupling capacitor
|
The struciure of this product is the direct water-cooling type,They can bear a great quantity of electric current,(more than several ten amperes.)and they have the lower equivalent inductance and resistivity,and resistivity,and are suitable for the use of the interconnection between inveter and matching transformer in the ligh-power solid-state .high-frequence electric source.Meanwhile,they could be used as the insulating coupling capacitor in other electric circuit of large quantity of current.
The main electronic parameters of the manufactured products are the following:
Moreover,we could produce other capacitors in the light of the agreement through consulation.
|
|
capacitance( μF ) |
The most voltage(VDC)
|
The mast bearing circuit (A)
|
The Cooling-Type
|
Size(mm)
(LxWxH)
|
1.25 |
2500 |
50 |
Directional water cooling |
130×70×110 |
2.5 |
2500 |
100 |
Directional water cooling |
160×100×110 |
3.0 |
2500 |
200 |
Directional water cooling |
235×70×47 |
Moreover,we could make the special products according to the discussed agreements between the buyers and the sellers. |
|
CS22-type high-power semiconductor high-frequence power-supply filter capacitor
|
This power-supply filter capacitor
is specially designed and made for the high-power
semiconductor high-frequence electronic source (above
80KW).Tt's outermast shell is made of the insulation
material.The four pairs of brass bolt are used as
it's outside electrode independently,and the epoxy
resinis adopted as it's whole insulated package.It's
natural inductance is petty,and its hight-frequence
dielectric loss is low.This product can bear a deal
of quantity of electric current.
Exception for the above-mentioned standards,wecould manufaciure the new products according to the agreement of the supply and requisitioning parties.
|
|
Norms and type |
Rated Capuliiance(μF)
|
Voltage rating (V)
|
Working Current
(A)
|
The use
|
Size(mm)
(LxWxH)
|
CS-2-0.4×4 |
0.4×4 |
1.2K |
100A |
100KW superaudio apparatus |
350×150×100 |
CS-2-0.4×4 |
0.4×4 |
1.2K |
200A |
100KW superaudio apparatus |
350×150×120 |
CS-2-2.5×4 |
2.5×4 |
1.2K |
100A |
200KW uperaudio apparatus |
350×150×120 |
CS22 |
2×4 |
280FAC |
500A |
100KW high frenquence equipment |
350×150×120 |
CB22 |
300 |
250AC |
-- |
低频交流电路滤波电容 |
240×50×165 |
Moreover,we could make the special products according to the discussed agreements between the buyers and the sellers. |
|
CS23-type high-frequence capacitor for the use of absorption circuit
|
These products are suitable for the use of the RC cbsorptjon circuit of the both ends of sime conductor units in the high-power solid-state hith-frauence electric source equipments.Their equivalent inductive quantity is lesser.
They can bear the higher peak point current and voltage component.the use in the absorption circujt is sterdy and dependable.
|
|
Electric capacity( μF) |
The working voltang (VDC ) |
The Size(mm)
(LxWxH)
|
0.05 |
1600 |
42×26×27 |
0.10 |
3000 |
80×60×30 |
Moreover,we can produce the special products according to the agreement of the supply and requisitioning parties. |
|
|